Widget HTML Atas

IOS 13 : How to FIX Unable For Check for Update IOS 13

IOS 13 : How to FIX Unable For Check for Update IOS 13

Unable to Check For Update IOS 13

Support for problems with wireless iOS updates

You may not be able to wirelessly update your iPhone, iPad, or iPod touch for one of the following reasons:

  • There is not enough space on your device.
  • The update loads very slowly.
  • The update server cannot be reached.
  • The update is not completed.

Insufficient space for the update

If there is not enough space to download and install an update, the software on your device tries to free up more space. iOS only removes app data that the system can reload itself. Your personal data will not be removed or moved. If the storage space is still insufficient, you can update the device using your computer .

If you can't connect the device to your computer, remove unused content and apps from the device to make room for the update. To do this, select "Settings"> "General"> "[Device] memory".

You can see for yourself  how much storage space your apps and content use .

The download takes a long time

You need an internet connection to update your device. The duration of the loading process depends on the size of the update and the internet speed. You can use your device as normal while the update is loading. The device will notify you as soon as the update is ready for installation. In order to speed up the loading process, you should not load other content at the same time and, if possible, use a WiFi network.

The update server cannot be reached or the update cannot be checked

When you try to update your device, you may see one of these messages:

iphone software update failed

"The search for updates failed. An error occurred while searching for a software update."

software update failed ios 13

"Update could not be checked. [Software] could not be checked because there is no longer a connection to the Internet."

Try again to update your device over the same network. If you still see one of these messages, update your device over another network or  through your computer . If the problem also occurs on other networks, remove the update .

Find out more  about iOS and iPad OS updates here .

The update is not completed

When installing the update , the status bar may move slowly . The duration of an update depends on its size and the number of files on your device.

If you are performing the update wirelessly, the device must be connected to a power source. If the device's battery ran out of power before the process was completed, connect the device to a power source and turn it on so that the update or restore can complete.

If the update does not complete and the status bar has not moved for some time,  restart the device and check if this resolves the problem. Here's how to do it if your device doesn't respond or doesn't turn on .

Delete update and reload

If you still can't install the latest iOS or iPadOS version, reload the update:

  • Go to Settings> General> [Device] Storage.
  • Search for the update in the listed apps.
  • Tap on the update and then on "Delete update".
  • Now go to "Settings"> "General"> "Software Update" and download the latest update.
If you don't see the update in the listed apps or if the problem recurs, you need to update the device with your computer using Finder or iTunes. 
source : support.apple.com

4 solutions to fix failed iPhone / iPad software updates

Downloading the latest version of iOS on your iPhone / iPad is always a good idea to take advantage of new and enhanced features and to keep your device up to date. However, sometimes you may find that the iOS software update (like iOS 11.1 / 11.2 / 11.3) fails to install for inexplicable reasons.

The iPad / iPhone software update error is no longer a rare phenomenon, many iOS users around the world have already been affected. It is actually one of the most common problems. If an iOS software update fails, the Settings and Close options appear. So you can either close the failed iPad / iPhone software update and wait a while before reinstalling it, or you can go to Settings and look for a solution.

We recommend one of the 4 methods below to fix a failed iPad / iPhone software update error, download the firmware again, and then use your iPad / iPhone without any problems. So let's not wait any longer, let's get started.

Part 1: Restart the iPhone / iPad and try again

First of all, let's start with the simplest option before looking at the more complex ones. Restarting your iPhone / iPad may seem strange, but you might be pleasantly surprised by the result. Failed software updates can often be fixed by simply restarting the device and trying again. This method also helps if the error is due to the fact that Apple receives too many update requests at a certain time and cannot process them.

You don't believe it Try it out now! Here's what you should do:
After the update of the iOS software has failed

Step 1: After the update of the iOS software (eg iOS 11.1 / 11.2 / 11.3) has failed, click on "Close".
 switch off your device by pressing the on  off button

Step 2: Now switch off your device by pressing the on / off button for 3 to 5 seconds. Then slide the bar at the top of the screen to the right to turn it off

Once the device is turned off, wait about 10 minutes.

Step 3: Press the power button again and wait for the Apple logo to appear. You will now be directed to your lock screen. Unlock your iPhone / iPad and try again to update the firmware.
Press the power button again and wait for the Apple logo to appear

Note: You can also restart your iPhone / iPad by holding down the Home and On / Off button for 3 to 5 seconds.

Part 2: Check the network status and wait a while

This is another simple tip to solve the problem of a failed iOS software update (e.g. iOS 11.1 / 11.2 / 11.3). Everyone would agree that a congested network or unstable signal strength can hinder or even prevent software downloading. Therefore, it is advisable to check the network status and wait some time before performing the update again. To check the network status, follow these steps.

Step 1: start checking your router. Make sure it is turned on and working properly. Then switch off your router for approx. 10 to 15 minutes and wait.

Step 2: Now switch on the router and connect via WiFi on your iPad / iPhone.

Step 3: Once your iPhone is successfully connected, go to "Settings"> "General"> "Software Update" and try again to install the new firmware.
try again to install the new firmware

If the above method doesn't help you, don't worry. Take a look at the 2 other methods that we list below.

Part 3: Update iPhone / iPad with iTunes

The third way to fix the problem of a failed iPad / iPhone software update is to install and update the iOS version via iTunes, a software specially designed and developed for managing iOS devices. This method is recommended by many users who prefer to download the software update on the device itself. This technique is also simple and only requires the following steps:

Step 1: Download the latest version of iTunes on your PC by visiting Apple's official website.

Step 2: After downloading, use a USB cable to connect your iPhone / iPad to the computer. Now wait for iTunes to recognize it.
use a USB cable to connect your iPhone

Connect iPhone to iTunes

Note: If iTunes does not open automatically, start the software and select the iOS device in the main window.

Step 3: The third step is to click on "Overview" in the options on the screen. Now wait until the next screen opens. Once you're done, select "Check for updates" as shown in the image below.

Check for updates

iTunes Summary

Step 4: Simply press “Update” when asked if an update is available.

Simply press “Update” when asked if an update is available

Update iPhone

Now all you have to do is wait for the installation to finish. Please be careful not to disconnect your iPad / iPhone before the process is complete.

It's easy, isn't it?

Part 4: Download the firmware manually

The last and final solution to fix a failed iPad / iPhone software update is to manually download the firmware. However, this is your very last option. You should only download the iOS IPSW file if nothing else works. IPSW are files that help download the latest firmware if the normal way does not produce the desired result.

This process is lengthy and tedious, but the following steps will make your work easier:

Step 1: Start downloading the file on your PC. Make sure that you only download the file suitable for your iPhone / iPad, depending on the model and type. You can download the IPSW file for each device model from the link below .

Step 2: Now connect your iPhone / iPad to the computer using a USB cable and wait until iTunes has recognized it. Once you're done, you'll need to click the "Overview" option in iTunes and then continue.

Step 3: This step is a little difficult, so gently press “Shift” (on Windows) or “Option” (on Mac) and click on “Restore iPad / iPhone”.

IOS 13 : How to FIX Unable to Check For Update IOS 13

Restore iPhone / iPad

With the above step, select the IPSW file you downloaded earlier.

select the IPSW file you downloaded earlier

Select IPSW file

Now wait for iTunes to finish the software update process. This can take a few minutes.

Once the process is complete, you can proceed to retrieve all backed up data and use your iPhone / iPad with the latest iOS version.

The failed iOS software update (like iOS 11.1 / 11.2 / 11.3) error may seem a little confusing and strange and leave you at a loss. With this article we want to make sure that we provide you with the simplest explanations for all 4 methods and thus help you to find the best solution and for this recurring problem. We hope you will be able to use it to solve your iOS software update problems efficiently and easily. We would also like to encourage you to try these methods and share your experience with us.